Triple (Flap) 3x1 horizontal vent cannula w/ spatulated tip, 90° of extraction
Triple (Flap) 3x1 horizontal vent cannula w/ spatulated tip, 90° of extraction
Couldn't load pickup availability
Triple (Flap) 3x1 horizontal vent cannula with spatulated tip — 90° extraction
Three horizontal (flap) vents in a row on one side of a flattened, spatulated tip. The spatula shape spreads the tip over a wider plane while the single-sided vents keep extraction directed at 90°, so you can turn the vents away from the skin. A short, non-aggressive cannula for delicate areas such as the neck and back.
Specifications
- Vent pattern: 3 × 1 horizontal (flap) vents, 90° of extraction
- Tip: spatulated, blunt
- Diameter: Ø3.0 mm
- Hubs: Secure Luer™, Toomey, ACME, MicroAire® PAL® compatible, Nouvag® compatible, VASER® compatible
- Reprocessing: reusable, fully autoclavable
- SKU: CM171335 + hub suffix (-L Luer, -T Toomey, -A ACME, -M MicroAire, -N Nouvag, -V VASER)
MicroAire® PAL® cross-reference
Order this cannula with the MicroAire® PAL® compatible hub (-M) as a reusable alternative to the MicroAire® PAL® part number below (MicroAire tip style: Spatula, three-hole).
| CLINIMED SKU | Diameter | MicroAire® tip style | MicroAire® part no. (reusable) | MicroAire® part no. (single-use) |
|---|---|---|---|---|
| CM171335-M | Ø3.0 mm | Spatula (three-hole) | – | PAL-30S3 |
Matched by tip style and diameter. Lengths can differ; if you need a specific length, contact us before ordering. See the full MicroAire® PAL® compatible range. MicroAire® and PAL® are registered trademarks of MicroAire Surgical Instruments, LLC; Nouvag® and VASER® are trademarks of their respective owners. CLINIMED is not affiliated with or endorsed by these companies; part numbers are given for identification only.
Additional Information
Description
Volume
Performance
Important Notice
Important notice about ALL CLINIMED cannulas : Our range of cannulas are custom made, in-house to your required specifications. We require a minimum of 10-14 days for standard delivery depending on quantities. PLEASE NOTE, SOME CONFIGURATIONS CAN TAKE UPTO 4 WEEKS FOR DELIVERY. All custom instruments are covered under CLINIMEDS standard warranty, however, all cannulas sales are final and cannot be returned for credit or exchange.
Complete your setup
Protect the incision with Exo-Port skin ports
Exo-Port™ liposuction skin ports are CLINIMED's companion product to our cannulas. The port sits in the incision so the cannula never rubs against the skin edge, helping protect the incision site from frictional and thermal abrasion during power-assisted (PAL) and ultrasound-assisted (UAL) liposuction. Reusable, autoclavable and made in the USA.
Match the port to your cannula diameter: Ø3.0 mm ports for 3 mm cannulas, Ø4.0 mm for 4 mm, Ø5.0 mm for 5 mm, and Exo-Port MAX for basket and etching cannulas.
Opens exo-port.com in a new tab.